CSL00 Internal Lift Control - Internal Sinus Lift System
Double-tap and hold to zoom.
Mouse over the image to zoom.
Click to Enlarge

CSL00 Internal Lift Control - Internal Sinus Lift System

Product Code: CSL00

USD $1,230.25 /1EA
  • To Be Used On : Surgery
    • 1EA

For the internal sinus lift, MEISINGER offers the Internal-Lift-Control, two different Crestal-Lift-Control systems and the Lift-Control Plus.

During the performance of the internal sinus lift with the Internal-Lift-Control, bone inside the implant site is displaced in the direction of the maxillary sinus, while the Schneiderian membrane is lifted. This procedure is suitable for the augmentation of small vertical defects with a residual bone height of more than 6 mm.

The elevation of the Schneiderian membrane occurs during the drilling process portion of the Crestal-Lift-Control procedure. The atraumatic design of the Crestal Drill with its four cutting edges and concave head allows for the safe formation of a conical bone flap and is ideally suited for collecting bone chips. Additionally, the stop sleeve system, which is tailored to the special instruments, prevents the membrane from being injured or punctured.

 

 Made in Germany

Are you happy with your meisingerusa.com experience? We'd love to hear your feedback!     

Elevators  
• SL25 Sinus Lift, Length = 16.0mm, Ext. Ø = 2.5mm
• SL30 Sinus Lift, Length = 16.0mm, Ext. Ø = 3.0mm
• SL35 Sinus Lift, Length = 16.0mm, Ext. Ø = 3.5mm
• SL40 Sinus Lift, Length = 16.0mm, Ext. Ø = 4.0mm
• SL45 Sinus Lift, Length = 16.0mm, Ext. Ø = 4.5mm
• SL50 Sinus Lift, Length = 16.0mm, Ext. Ø = 4.5mm
Expansion Burs  
• B2004 Blue/Green, Expansion Drill, Length = 12.0mm, Ext. Ø = 2.7mm, RAL
• E2004 Red/Blue, Expansion Drill, Length = 12.0mm, Ext. Ø = 3.4mm, RAL
• F2004 Red/Blue, Expansion Drill, Length = 12.0mm, Ext. Ø = 3.9mm, RAL
• G2004 Purple/Green, Expansion Drill, Length = 11.0mm, Ext. Ø = 4.5mm, RAL
• H2004 Red/Green, Expansion Drill, Length = 11.0mm, Ext. Ø = 4.9mm, RAL
Impact Tool  
•  SL0 Impact Tool, Length = 100.0mm
•  SL1 Impact Tool, Length = 133.0mm
Pilot Burs  
• B2001 Length = 15.0mm, Ext. Ø = 1.6mm, RAL
• G2001 Length = 11.0mm, Ext. Ø = 3.4mm, RAL
Steel Burs  
• 186RF-018-RA Initial Bur, Length = 12.0mm, Ext. Ø = 1.8mm, RA

 

Optionally Available:  
• HI070 Teflon Coated Mallet, Length = 195.0mm
Average Rating:
Review this product:
Add First Review