BMS00 Micro Screw System
Product Code: BMS00
- To Be Used On : Surgery
The Micro Screw System is used for the minimally invasive and safe fixation of cortical bone grafts. In particular, the osteosynthesis screws developed with Prof. Dr. Khoury make these kits very unique. The Micro Screws are made from a special surgical implant steel and, with their diameters of 1.0 mm and 1.2 mm, they ensure that bone plates are fixed in a stable and secure manner. The Micro Screw System can be used for vertical, horizontal, and three-dimensional bone augmentation with different defect sizes.
- Used for the safe fixation and stabilization of cortical bone grafts
- Micro Screws have high stability despite their reduced diameter
- Micro Screws are made of surgical stainless steel
- Compatible with the Carrota/Carrot Technique and Bone Shield Technique
Made in Germany
Developed by Prof. Dr. Fouad Khoury
Prof. Dr. Khoury received his dental education at St. Joseph University in Beirut, Lebanon. Specializing in Oral Surgery at the Universities of Freiburg and Muenster, Germany. Since 1994, Prof. Khoury has been a full-time professor at the Department of Oral & Maxillo-Facial Surgery of the University of Muenster and Chairman of the Privatklinik Schloss Schellenstein, Olsberg, Germany.
| Optionally Available: | ||
|---|---|---|
| Item: | Description: | |
 | 915DM-220-HP | Super Flexible Diamond Disc |
Are you happy with your meisingerusa.com experience? We'd love to hear your feedback!
| Initial Burs | |
| • 202RF-008-RAXL | Stainless Steel, Length = 14.0mm, Ext. Ø = 0.8mm, RAXL |
| • 202RF-010-RAXL | Stainless Steel, Length = 14.0mm, Ext. Ø = 0.8mm, RAXL |
| Pilot Burs | |
| • MSPB1-008-RA | Pilot Drill, Length = 14.0mm, Ext. Ø = 0.8mm, RA |
| • MSPB2-010-RA | Pilot Drill, Length = 14.0mm, Ext. Ø = 1.0mm, RA |
| Screwdrivers | |
| • MSSDM | Manual, Length = 141.2mm |
| • MSSDW-RA | RA, Length = 24.0mm |
| • MSGSD | Claw for Manual Screwdriver, Length = 33.0mm, Ext. Ø = 0.6mm |
| Screws | |
| • MSS10-040 | (x2) Length = 4.0mm, Min. Ø = 0.6mm, Ext. Ø = 1.0mm, Head Ø = 1.7mm |
| • MSS10-060 | (x3) Length = 6.0mm, Min. Ø = 0.6mm, Ext. Ø = 1.0mm, Head Ø = 1.7mm |
| • MSS10-080 | (x3) Length = 8.0mm, Min. Ø = 0.6mm, Ext. Ø = 1.0mm, Head Ø = 1.7mm |
| • MSS10-100 | (x3) Length = 10.0mm, Min. Ø = 0.6mm, Ext. Ø = 1.0mm, Head Ø = 1.7mm |
| • MSS10-120 | (x2) Length = 12.0mm, Min. Ø = 0.6mm, Ext. Ø = 1.0mm, Head Ø = 1.7mm |
| • MSS10-140 | (x2) Length = 14.0mm, Min. Ø = 0.6mm, Ext. Ø = 1.0mm, Head Ø = 1.7mm |
| • MSS12-040 | (x1) Length = 4.0mm, Min. Ø = 0.7mm, Ext. Ø = 1.2mm, Head Ø = 1.7mm |
| • MSS12-060 | (x2) Length = 6.0mm, Min. Ø = 0.7mm, Ext. Ø = 1.2mm, Head Ø = 1.7mm |
| • MSS12-080 | (x2) Length = 8.0mm, Min. Ø = 0.7mm, Ext. Ø = 1.2mm, Head Ø = 1.7mm |
| • MSS12-100 | (x2) Length = 10.0mm, Min. Ø = 0.7mm, Ext. Ø = 1.2mm, Head Ø = 1.7mm |
| • MSS12-120 | (x1) Length = 12.0mm, Min. Ø = 0.7mm, Ext. Ø = 1.2mm, Head Ø = 1.7mm |
| • MSS12-140 | (x1) Length = 14.0mm, Min. Ø = 0.7mm, Ext. Ø = 1.2mm, Head Ø = 1.7mm |
